Tajima TMCE firmware update.

Post Reply
Site Admin
Posts: 23
Joined: Fri Nov 08, 2019 7:31 pm
Location: Knoxville TN | Daytona Beach FL

Tajima TMCE firmware update.

Post by adminemb » Mon Nov 11, 2019 1:50 pm

La FemmeFan


I had Hirsch send me a copy of the ex.sys file I need to reload onto the Tajima TMCE, but I do not seem to be able to get the file to load from the USB stick. I do not have the original floppy drive for this machine as it was replaced with a Richpeace Floppy to USB reader instead. Has anyone had luck getting a USB stick to load system software through one of these? If that doesn't work, is there anyone in the SF Bay Area that will let me borrow their floppy drive so I can load up my system software again or have a working drive they can sell me?

Thanks for any help!

Leslie Howard

Ken Bussell

Attached is a boot loader file that you need to save to your USB stick along with the machine software.

The software will not load to the machine using a USB reader unless you have this file on the thumbdrive as well.

If you have any questions you can call me here at Pinpoint Intl in St. Louis 877-778-9850

Ken Bussell Wild Horse Creations

Post Reply