Tips for embroidering beanies

Embroidering on various different types of item tips and tricks for best results.
Hats, Jackets, Napkins, Pillow cases, Toilet paper, towels, polos ... Nylons, cottons, satin and other textiles.
Post Reply
matrophy
Posts: 2
Joined: Tue Nov 12, 2019 10:38 pm

Tips for embroidering beanies

Post by matrophy » Sat Nov 16, 2019 3:02 pm

In the 10+ years that I've owned my NEO I have never embroidered beanies. Now I have an order and I am wondering if there are any tips for them. I had the logo digitized for the stretchy fabric and I plan in using tearaway and I'm not sure if I should use topping. I am using a clamp and I notice that the edges are arced rather than being in a straight line. Should I stretch them so they lay in a straight line inside the clamp or should I let them remain slightly arced? Hope that makes sense

mattocks
Posts: 1
Joined: Mon Nov 18, 2019 10:49 am

Re: Tips for embroidering beanies

Post by mattocks » Mon Nov 18, 2019 10:51 am

So, I asked the same question a few months back .

I found this youtuber that gives you a pretty good step by step.



She uses masking tape, rather than clams and a topping for her sew outs.

Worked on our end.

Post Reply